IntroductionHikelok MV2 metering valves have been well accepted and widely used in a variety of industries for many years. A wide variety of end connectors are offered for all types of installation.NACE compliant materials and oxygen clean are also available, along with an extensive list of materials of construction.Working pressure is up to 1000 psig (68.9 bar),working temperature is from -10℉ to 400℉ (-23℃ to 204℃).Every metering valve is factory tested with nitrogen at 1000 psig (69 bar). Shell testing is performed to a requirement of no detectable leakage with a liquid leak detector.
FeaturesMaximum working pressure: 1000 psig (68.9 bar)Working temperature: -10℉ to 400℉ (-23℃ to 204℃)One-piece forged body Orifice sizes: 0.056" (1.42 mm)Stem taper: 3°Shutoff service: not availablePanel mountableFlow pattern: straight, angle, cross and double patternsHandle type: vernier and slottedVariety of end connections
AdvantagesTapered stem tip accurately controls gas and liquid flow ratesStem threads are isolated from system fluidHandle stop helps prevent damage to stem and orificeStem O-ring contains system fluidVariety of end connectionsPanel mountableStraight, angle, cross and double patternVernier and slotted handle100% factory tested.
More OptionsOptional 2 way straight,2 way angle,double,cross flow patternOptional fluorocarbon FKM,buna N,ethylene propylene,neoprene,kalrez O-ring materialOptional knurled round,vernier,slotted handle typeOptional 316 S.S.,316L S.S.,304 S.S.,304L S.S. body material
