GabatarwaHikelok 5 manifolds na bawul an tsara su don aikace-aikacen matsa lamba daban-daban. 5-bawul manifolds kunshi babban matsa lamba bawul, low matsa lamba bawul, balance bawul da biyu rajistan shiga (bushewa) bawuloli. Ana amfani da 5-valve manifolds don kowane nau'in kayan da aka shigo da su, kuma ana shigar da shi tare da kowane nau'in matsin lamba, kwarara, matakin ruwa da sauran watsawa. Lokacin aiki, rufe ƙungiyoyi biyu na bawuloli masu dubawa da ma'auni. Idan ana buƙatar dubawa, kawai yanke babban matsa lamba da ƙananan bawul ɗin matsa lamba, buɗe bawul ɗin ma'auni da bawul ɗin dubawa guda biyu, sannan rufe bawul ɗin ma'auni don daidaitawa da daidaita mai watsawa.
Siffofinaiki matsa lamba: Bakin karfe har zuwa 6000 psig (413 bar) Alloy C-276 har zuwa 6000 psig (413 mashaya) Alloy 400 har zuwa 5000 psig (345 bar)Yanayin aiki: PTFE shiryawa daga -65 ℉ zuwa 450 ℉ (-54 ℃ zuwa 232 ℃) Graphite shiryawa daga -65 ℉ zuwa 1200 ℉ (-54 ℃ zuwa 649 ℃)Orifice: 0.157 in. (4.0 mm), CV: 0.35Ƙirar babba da ƙananan tushe, Zaren Stem sama da shiryawa an kiyaye su daga kafofin watsa labarai na tsarinAmintaccen wurin zama na baya a cikin cikakken buɗaɗɗen matsayiGwaji don kowane bawul tare da nitrogen a matsakaicin matsa lamba na aiki
AmfaniGina guda ɗaya yana ba da ƙarfi.Ƙididdigar ƙirar taro yana rage girman da nauyiSauƙi don shigarwa da kulawaMarufi daban-daban da kayan suna samuwaTsawon tsakiyar mai watsa matsa lamba shine 54mm
Ƙarin ZaɓuɓɓukaMarufi na zaɓi PTFE, GRAPHITETsarin Zaɓuɓɓuka da sigar tashar tashaZabin abu 316 bakin karfe, Alloy 400, Alloy C-276