Welding is a very reliable connection method, which is widely used in industrial production in the world. The correct welding process can ensure that the welding joint is firm and leak free, so it can play a very important connection role.
There are two common forms of welding: socket welding and butt welding
Socket welding: insert the pipe into the step hole at the socket welding end and weld a circle on the outside to complete the socket welding connection. During socket welding, insert the pipe into the socket welding hole until it reaches the bottom, and then pull out the pipe by about 1.5mm (0.06in.), then carry out welding, which can avoid welding stress during welding.
Butt welding: the welding joints of weldments at both ends shall be opposite, and 1.5mm (0.06in.) shall be reserved. Then weld a circle along the joint to ensure that the pipe wall is fully welded to obtain reliable strength. As shown in the figure, the valve with butt welding connection can be butt welded with pipe, and the welded fittings can also be butt welded with pipe.
Welding specification operation
Hikelok's welding personnel have passed professional training and assessment, and strictly implement the welding process during welding to ensure that the appearance, function and performance of the products reach the ideal state after welding.
Hikelok welding products include needle valve, ball valve, welded fittings, etc., which can also be customized according to the working conditions of customers.
For more ordering details, please refer to the selection catalogs on Hikelok's official website. If you have any selection questions, please contact Hikelok's 24-hour online professional sales personnel.
Post time: Apr-27-2022